Headphone and Mixer Fabrication

Fabrication Info

DifficultyRating: 6 / 10

Components 32
Resistors 12
Capacitors 11 Electrolytic, 3 Polyester
Diodes 2
Transistors 2
ICs 1
Other 1 Pots

This section is pretty simple to solder, as there arent that many components. Testing this section is probably best done after you have the IO Board in place, because there are quite a few sections that you will need to power.

You will probably want to socket the LA4140 on a SIP strip.

Schematic Power Supply Voltage Controlled Oscillator Voltage Controlled Filter Envelope Generator Voltage Controlled Amplifier Headphone And Mixer Digital Sequencer Midi, USB and Sync
Fabrication Building the Ps Building the Vco Building the Vcf Building the Envelope Building the Vca Building the Headphone And Mixer Building the Sequencer Building the Midi and Sync Finishing It Off
Testing Testing the Ps Testing the Vco Testing the Vcf Testing the Envelope Testing the Vca Testing the Headphone And Mixer Testing the Sequencer Testing the Midi and Sync
Mods Ps Mods Vco Mods Vcf Mods Envelope Mods Vca Mods Headphone And Mixer Mods Sequencer Mods Midi And Sync Mods Finishing Mods