User Tools

Site Tools


eaglelibrary

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
eaglelibrary [2010/03/11 20:34]
ladyada
eaglelibrary [2016/01/28 18:05] (current)
Line 3: Line 3:
 ===== What be in the Adafruit Eagle library ===== ===== What be in the Adafruit Eagle library =====
  
-hells yes its my very own mixtape of package footprints. Dont forget you can also grab parts out of any  adafruit project'​s .brd file by running ​extract-pkg.ulp (or whatever its called)+hells yes its my very own mixtape of package footprints. Dont forget you can also grab parts out of any  adafruit project'​s .brd file by running ​exp-project-lbr.ulp .
 However, since its nice to be tidy, I'll be merging everything into ONE FILE called the Ye Olde Adafruit Eagle Librarie, available at github However, since its nice to be tidy, I'll be merging everything into ONE FILE called the Ye Olde Adafruit Eagle Librarie, available at github
  
Line 22: Line 22:
 ==== Mechanical ==== ==== Mechanical ====
  
-   * **1x2** - a 2 pin 3.5mm header +   * **[[http://​www.ladyada.net/​wiki/​partselector/​terminals|1x2]]** - a 2 pin 3.5mm header ​for a 2 pin terminal block 
-   * **2.1mmjack** - a through-hole 2.1mm DC jack+   * **[[http://​www.ladyada.net/​wiki/​partselector/​powerconn#​dc_jacks|2.1mmjack]]** - a through-hole 2.1mm DC jack
    * **FIDUCIAL** - you know, a fiducial!    * **FIDUCIAL** - you know, a fiducial!
    * **USB** - mini-usb jack with nice labels (4ucon part #06564)    * **USB** - mini-usb jack with nice labels (4ucon part #06564)
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​connectors#​audiovideo|STEREOJACK]]** - stereo 3.5mm '​headphone'​ jack with switches
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​connectors#​audiovideo|MIDI JACK]]** - DIN-5 '​MIDI'​ jack
    * **JST_2PIN** - 2 pin 2mm JST connector in SMT and THM    * **JST_2PIN** - 2 pin 2mm JST connector in SMT and THM
-   * **PINHD-1x1** - 1-pin hole for wires, etc +   * **[[http://​www.ladyada.net/​wiki/​partselector/​connectors#​memory_card_connectors|SD/​MMC card]]** - a few SD card holder layouts 
-   * **PINHD-1x9** - 1x9 0.1" pad hole for wires/​header,​ etc. with round pads +   * **[[http://​www.ladyada.net/​wiki/​partselector/​connectors#​memory_card_connectors|MICROSD]]** - Micro-SD / transflash holder 
-   * **PINHD-1x10** - 1x10 0.1" pad hole for wires/​header,​ etc. with round pads+   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x1]]** - 1-pin hole for wires, etc 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x3]]** - 1x3 0.1" pad hole for wires/​header,​ etc. with round pads 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x6]]** - 1x6 0.1" pad hole for wires/​header,​ etc. with round pads 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x8]]** - 1x8 0.1" pad hole for wires/​header,​ etc. with round pads 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x9]]** - 1x9 0.1" pad hole for wires/​header,​ etc. with round pads 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​header|PINHD-1x10]]** - 1x10 0.1" pad hole for wires/​header,​ etc. with round pads
  
  
 ==== Batteries ==== ==== Batteries ====
-   * **AAA** - PC pin single AAA holder. Mouser part #12BH412 - but pretty much any 1x AAA battery holder should be the same  +   * **[[http://​www.ladyada.net/​wiki/​partselector/​powerconn#​cylindrical|AAA]]** - PC pin single AAA holder. Mouser part #12BH412 - but pretty much any 1x AAA battery holder should be the same  
-   * **CR1220** - 12mm coin cell holder in THM or SMT+   * **[[http://​www.ladyada.net/​wiki/​partselector/​powerconn#​coin|CR1220]]** - 12mm coin cell holder in THM or SMT
  
 ==== Classic libs ==== ==== Classic libs ====
Line 41: Line 48:
    * **CPOL-US** - The classic capacitor library, with some larger THM pads and fixed 0805 to IPC standards    * **CPOL-US** - The classic capacitor library, with some larger THM pads and fixed 0805 to IPC standards
    * **R-US** - The classic resistor library, with some larger THM pads and fixed 0805 to IPC standards    * **R-US** - The classic resistor library, with some larger THM pads and fixed 0805 to IPC standards
-   * **1N4004** - a basic power diode with larger pads+   * **[[http://​www.ladyada.net/​wiki/​partselector/​diodes|1N4004]]** - a basic power diode with larger pads
  
 ==== Crystals & such ==== ==== Crystals & such ====
Line 63: Line 70:
     * [[http://​www.ladyada.net/​make/​gpsshield/​modules.html|LassenIQ]]     * [[http://​www.ladyada.net/​make/​gpsshield/​modules.html|LassenIQ]]
  
-==== Other ====+==== Passives ​====
    * **Trimpot** - SMT trimpots, including TC33X package    * **Trimpot** - SMT trimpots, including TC33X package
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​pots|THUMBPOT]]** - thumbwheel potentiometer
 +==== Other ====
 +
    * **[[http://​www.ladyada.net/​wiki/​partselector/​speaker#​piezo|SPEAKER]]** - PS1240 inexpensive 3Vpp piezo    * **[[http://​www.ladyada.net/​wiki/​partselector/​speaker#​piezo|SPEAKER]]** - PS1240 inexpensive 3Vpp piezo
-   * **FB** - Ferrite bead Digikey # P9821BK-ND +   * **[[http://​www.ladyada.net/​wiki/​partselector/​inductors?​s[]=ferrite%20bead|FB]]** - Ferrite bead Digikey # P9821BK-ND 
-   * **L** - THM 1-2Amp inductors such as 6000x and 1800R series+   * **[[http://​www.ladyada.net/​wiki/​partselector/​inductors|L]]** - THM 1-2Amp inductors such as 6000x and 1800R series
    * **[[http://​www.ladyada.net/​wiki/​partselector/​speaker#​speakers|PS603]]** - Small 8 ohm speaker from Mouser    * **[[http://​www.ladyada.net/​wiki/​partselector/​speaker#​speakers|PS603]]** - Small 8 ohm speaker from Mouser
    * **PNA4602** - 3 pin 38KHz IR detector    * **PNA4602** - 3 pin 38KHz IR detector
    * **[[http://​www.adafruit.com/​blog/​2010/​02/​05/​b00m-adafruit-eagle-library-an-arduino-package/​|Arduino]]** - A '​shield'​ layout    * **[[http://​www.adafruit.com/​blog/​2010/​02/​05/​b00m-adafruit-eagle-library-an-arduino-package/​|Arduino]]** - A '​shield'​ layout
 +   * PN2222 and PN2907 transistors - general purpose, with large pads
  
  
Line 89: Line 100:
    * **MAX1898** - Lipoly    * **MAX1898** - Lipoly
    * **MAX8601** - Lipoly    * **MAX8601** - Lipoly
-   * **MC3340** - NiMH/NiCad+   * **MC3340/2** - NiMH/NiCad
  
 === Boost converters === === Boost converters ===
-     * LT1173 +     * **LT1173** 
-     * [[http://​www.ladyada.net/​wiki/​partselector/​vreg#​dcdc_converters|LT1302]] +     * **[[http://​www.ladyada.net/​wiki/​partselector/​vreg#​dcdc_converters|LT1302]]** - up to 600mA @ 5V DC/DC boost 
-     * [[http://​www.ladyada.net/​wiki/​partselector/​vreg#​dcdc_converters|MAX756]] +     * **[[http://​www.ladyada.net/​wiki/​partselector/​vreg#​dcdc_converters|MAX756]]** - ~200mA 3/5/Adj DC/DC boost  
-     * MAX757+     * **MAX757** 
 + 
 +=== Codec === 
 + 
 +  * [[http://​www.ladyada.net/​wiki/​partselector/​codec#​dacs|MCP4921]] - 12 bit DAC 
 + 
 +=== Regulators === 
 +   * **MCP1700** - an inexpensive TO-92 regulator 
 +   * **LP298x** - A generic collection of low dropout SOT-23-5 regulators 
 + 
 +=== Transistors === 
 +   * **FQN1N50C** - TO-92 MOSFET 
 +   * **[[http://​www.ladyada.net/​wiki/​partselector/​transistors|PN2222 and PN2907]]** - matching NPN and PNP BJT's, in nicer-to-solder packages
  
  
Line 103: Line 126:
    * **[[http://​www.ladyada.net/​wiki/​partselector/​vreg#​xx_79xx|78xx]]** - The original Eagle lib with larger pads for the TO-92 package    * **[[http://​www.ladyada.net/​wiki/​partselector/​vreg#​xx_79xx|78xx]]** - The original Eagle lib with larger pads for the TO-92 package
    * **MAX6921** - VFD driver in PLCC    * **MAX6921** - VFD driver in PLCC
-   * **[[http://​www.ladyada.net/​wiki/​partselector/​transistors|PN2222 and PN2907]]** - matching NPN and PNP BJT's, in nicer-to-solder packages 
-   * **FQN1N50C** - TO-92 MOSFET 
    * **[[http://​www.ladyada.net/​wiki/​partselector/​ic#​logic|74*125]]** - this is for the 74AHC125 we buy, its a bit bigger than most DIP chips and its been a pain.    * **[[http://​www.ladyada.net/​wiki/​partselector/​ic#​logic|74*125]]** - this is for the 74AHC125 we buy, its a bit bigger than most DIP chips and its been a pain.
  
/home/ladyada/public_html/wiki/data/attic/eaglelibrary.1268339689.txt.gz · Last modified: 2016/01/28 18:05 (external edit)