Differences

This shows you the differences between two versions of the page.

--- laserinfo:supplies [2007/03/09 00:51]
ladyada created
+++ laserinfo:supplies [2016/01/28 18:05] (current)
@@ Line 1: / Line 1: @@
-====== Laser Supplies ======
+====== Moved! ======
-These are optional supplies, often "consumables"
-===== Cermark Metal Marking Spray =====
-{{http://farm1.static.flickr.com/179/414932299_c9c824a332_o.jpg|http://www.flickr.com/photos/adafruitlaser/414932299/in/photostream/}}
-{{http://farm1.static.flickr.com/176/414932648_2dd8effc45_o.jpg|http://www.flickr.com/photos/adafruitlaser/414932648/in/photostream/}}
-** Shiny surfaces** such as backs of iPods: use the [[http://www.laserbits.com/main.php3?SELECT=CerMark+Metal&CLASS=Laser+Supplies|Cermark laser etching spray]] - we get ours from [[http://www.laserbits.com/|Laserbits]] ($64). Spray the back of the iPod, wait 15-20 minutes then etch as usual. The power should be 100% and the speed should be the wattage of your laser, for us the speed is 35 since we have a 35W later.
-{{http://farm1.static.flickr.com/155/414932527_01181892d4_o.jpg|http://www.flickr.com/photos/adafruitlaser/414932527/in/photostream/}}
-After the etch you just rub it off with a damp paper towel.
+This tutorial has moved to [[http://learn.adafruit.com/all-about-laser-cutters|http://learn.adafruit.com/all-about-laser-cutters]]

AdaWiki