mdcpickandplace:diytray
This is an old revision of the document!
<iframe src="http://player.vimeo.com/video/15752459" width="400" height="225" frameborder="0"></iframe><p><a href="http://vimeo.com/15752459">This old pick and place - making a tray</a> from <a href="http://vimeo.com/adafruit">adafruit industries</a> on <a href="http://vimeo.com">Vimeo</a>.</p>
Parts list!
- 20mm Extrusion 2 ft piece (McMaster #5537T104) x 2 pieces
- 20mm Extrusion T-nuts (McMaster #5537T154) x 4 bags of 4
- Flange Button Head Cap Screw, M5 Size, 8 mm Length, 0.80 mm Pitch (McMaster #92137A412) x 1 bag
- 20mm Extrusion 90 Degree Bracket, Single, 2-Hole (McMaster #537T181) x 4 pieces
- 20mm Extrusion endcap (Mcmaster #537T14) x 4 pieces
- Clear Cast Acrylic Sheet, .060" Thick, 12" X 24" (Mcmaster #8560K172) x 1 piece
Total is $50
/home/ladyada/public_html/wiki/data/attic/mdcpickandplace/diytray.1286845343.txt.gz · Last modified: 2016/01/28 18:05 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
