skip to content

AdaWiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

You are here: start » mdcpickandplace » tips

Trace:

mdcpickandplace:tips

====== PCB Stencils ======

Unless you get a dispenser module add-on, you'll need to silkscreen / screenprint solder paste onto the PCBs. Most PCB stencils are made of stainless steel and last years. Right now [[http://ladyada.net/wiki/laserinfo/pcb_stencils|we make our stencils out of kapton (polyamide) with a laser cutter]]

You can also get this done for you as a service from [[http://www.pololu.com/catalog/product/446|Pololu]], or [[http://www.ohararp.com/Stencils.html|Ohararp]] It should be $20 or so for a small sheet.

/home/ladyada/public_html/wiki/data/attic/mdcpickandplace/tips.1257353447.txt.gz · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

CC Attribution-Share Alike 4.0 International