Differences

This shows you the differences between two versions of the page.

--- partfinder:suggestions [2010/10/22 16:22]
sumatra
+++ partfinder:suggestions [2011/10/21 18:16]
dorkusmonkey Added some more suggestions (high amperage buck/boost converter, diodes, optoisolator)
@@ Line 3: / Line 3: @@
 Add suggestions for additions/changes to this wiki here.
+----
+Just received some APEM 25136NAH slide switches from Digikey (part [[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=679-1887-ND|679-1887-ND]]) and they're very, very nice.  0.1" pin spacing, but rated for 4A!  A bit pricey at $4 each, but the action is smooth.
+ --- //[[paul_j@ste-marie.org|Paul J. Ste. Marie]] 2011/05/25 10:54//
+----
+A good general purpose N-channel enhancement mode MOSFET in the 200-800 mA range to go with the P-channel one. Generally something that can be switched on by logic and drive IR LEDs and the like.
+The adafruit parts library has the [[http://www.fairchildsemi.com/ds/FQ/FQN1N50C.pdf|FQN1N50C]] ([[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=FQN1N50CTACT-ND|Digikey]]), with an Vdss max of 500v, Idm of 380mA, but a Vgs(th) max of 4v.
+Poking around at Digikey, I found the [[http://www.diodes.com/datasheets/ZVN4206AV.pdf|ZVN4206AV]] ([[http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=ZVN4206AV-ND|Digikey]]), with an Vdss max of 60v, Idm of 600mA, and a Vgs(th) max of 3v.
+ --- //[[paul_j@ste-marie.org|Paul J. Ste. Marie]] 2011/05/13 12:17//
+----
   * I would like to see information about trim resistors/potentiometers.
@@ Line 52: / Line 65: @@
   * Multi-turn linear pots
+How about solder paste, flux etc. ?
+I was looking for something like a breadboard, but a PCB board.  I wanted to take my project from breadboard to PCB.  I found one from BUSBOARD Prototype Systems, the SB400.
+I would like to see suggestions for relays or other devices for controlling household AC devices with something like an Arduino. (e.g. a "Clapper") - hghowe 03/26/2011
+      -Check out the power switch Tail, it does about like what you want, it lets you use a small current from something like the ardunio, with a Relay and that stuff inside, tucked away saftley ( here: [[http://www.adafruit.com/index.php?main_page=product_info&cPath=44&products_id=268L|Power Switch Tail at Adafruit Store]]
+I would like to see some suggestions for buck/boost converters that could handle in the 8-16A range (5-24V range maybe?) and some diodes that could handle the same.  It would also be nice to have some optoisolator suggestions.

AdaWiki

User Tools

Site Tools

Differences

Page Tools