This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
products:oled12864:index.html [2012/01/23 17:59] ladyada [Wiring] |
products:oled12864:index.html [2016/01/28 18:05] (current) |
||
---|---|---|---|
Line 45: | Line 45: | ||
The 128x32 SPI OLED is very easy to get up and running because it has built in level shifting. | The 128x32 SPI OLED is very easy to get up and running because it has built in level shifting. | ||
- | First up, take a piece of 0.1" header 10 pins long (this image has 10 but you should use 8) | + | First up, take a piece of 0.1" header 8 pins long |
- | [[http://www.ladyada.net/images/oled12864/headercut.jpg|{{ http://www.ladyada.net/images/oled12864/headercut_t.jpg?nolink&500x358 |}}]] | + | [[http://www.ladyada.net/images/oled12864/spi12832pins.jpg|{{ http://www.ladyada.net/images/oled12864/spi12832pins_t.jpg?nolink&500 |}}]] |
+ | |||
+ | Plug the header long end down into a breadboard and place the OLED on top. Solder the short pins into the OLED PCB | ||
+ | |||
+ | [[http://www.ladyada.net/images/oled12864/spi12832solder.jpg|{{ http://www.ladyada.net/images/oled12864/spi12832solder_t.jpg?nolink&500 |}}]] | ||
+ | |||
+ | Finally, connect the pins to your Arduino - **GND** goes to ground, **Vin** goes to 5V, **DATA** to digital **9**, **CLK** to digital **10**, **D/C** to digital **11**, **RST** to digital **13** and finally **CS** to digital **12** | ||
+ | |||
+ | [[http://www.ladyada.net/images/oled12864/spi12832wiring.jpg|{{ http://www.ladyada.net/images/oled12864/spi12832wiring_t.jpg?nolink&500 |}}]] | ||
+ | |||
+ | <class notewarning> | ||
+ | If you're using the 128x32 OLED, be sure to uncomment the "#define SSD1306_128_32" in the top of Adafruit_SSD1306.h to change the buffer size | ||
+ | </class> | ||
==== 128x64 OLED ==== | ==== 128x64 OLED ==== | ||
Line 87: | Line 99: | ||
==== Arduino Library & Examples ==== | ==== Arduino Library & Examples ==== | ||
- | Download and install our Arduino library. If you're using another system, its pretty simple to adapt our code, the interface we use is basic bit-twiddling SPI. | + | Download and install our Arduino libraries – the links are at the bottom of this page. If you're using a different microcontroller, the code is pretty simple to adapt, the interface we use is basic bit-twiddling SPI. |
Load the example sketch to demonstrate the capabilities of the library and display. | Load the example sketch to demonstrate the capabilities of the library and display. | ||
Line 123: | Line 135: | ||
- | **[[https://github.com/adafruit/SSD1306|You can download our SSD1306 OLED display Arduino library from github]]** which comes with example code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 1K of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller. | + | **[[https://github.com/adafruit/Adafruit_SSD1306|You can download our SSD1306 OLED display Arduino library from github]]** which comes with example code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 1K of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller. You'll also have to install the [[https://github.com/adafruit/Adafruit-GFX-Library|Adafruit GFX graphics core library at this github repo]] and install it after you've gotten the OLED driver library. |
**[[http://www.adafruit.com/datasheets/UG-2864HSWEG01.pdf|UG-2864HSWEG01]] Datasheet** | **[[http://www.adafruit.com/datasheets/UG-2864HSWEG01.pdf|UG-2864HSWEG01]] Datasheet** | ||
Line 130: | Line 142: | ||
**[[http://www.adafruit.com/datasheets/SSD1306.pdf|SSD1306]] Datasheet** | **[[http://www.adafruit.com/datasheets/SSD1306.pdf|SSD1306]] Datasheet** | ||
+ | |||
+ | **[[https://github.com/adafruit/Adafruit-128x32-SPI-OLED-breakout-board-PCB|GitHub repo for 128x32 PCB]]** | ||
+ | |||
+ | **[[https://github.com/adafruit/Adafruit-128x64-Monochrome-OLED-PCB|GitHub repo for 128x64 PCB]]** |