User Tools

Site Tools


tutorials:knittingmachine:ftdicable.html

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
tutorials:knittingmachine:ftdicable.html [2010/11/02 11:42]
tek disambiguation using connector graphics
tutorials:knittingmachine:ftdicable.html [2016/01/28 18:05] (current)
Line 79: Line 79:
  
 {{  :​tutorials:​knittingmachine:​conntop-adafruit-kmt.png ​ |}} {{  :​tutorials:​knittingmachine:​conntop-adafruit-kmt.png ​ |}}
 +
 +Pin 1 is black, pin 2 will be red, pin 3 will be green, pin 6 is orange, and pin 7 is yellow.
  
 Next is the one tough part, you'll want to cut the green wire as close to the black sheathing. Then cut the red wire about in the middle and solder both green and red wires to the red wire so that you have two wire connections. See the following image: Next is the one tough part, you'll want to cut the green wire as close to the black sheathing. Then cut the red wire about in the middle and solder both green and red wires to the red wire so that you have two wire connections. See the following image:
/home/ladyada/public_html/wiki/data/pages/tutorials/knittingmachine/ftdicable.html.txt · Last modified: 2016/01/28 18:05 (external edit)