AdaWiki

====== Putting new patterns on the machine ======

Start up the disk drive emulator in the command line.

{{  :tutorials:knittingmachine:screen_shot_2010-11-01_at_3.57.52_pm.png  |}}

When "ready" lamp is lit, reset the machine's memory by pressing CE key, then type in 888, then press STEP key. **This deletes all stored patterns**, so [[backup.html|be sure to back up first]] if you have patterns on the machine you want to save!

Clear display with CE key, then prepare to load new data into memory by typing 551, then STEP.

{{  :tutorials:knittingmachine:07_enter_551.jpg?500  |}}

Display should go blank, then "ready" and "pattern no" lamps should illuminate.

{{  :tutorials:knittingmachine:10_ready_and_patternno_ligh.jpg?500  |}}

Press 1 to indicate which "track" to load from the disk drive emulator, then press STEP.

{{  :tutorials:knittingmachine:11_enter_track_number_1.jpg  |}}

Machine will beep when finished. Pick a pattern and knit as normal.

{{  :tutorials:knittingmachine:adafabric.jpg?500  |}}
AdaWiki

User Tools

Site Tools

Page Tools
