tutorials:learn:lcd:lcdshield.html
This is an old revision of the document!
Soldering up a 'shield'
This tutorial will show you how to solder together a shield for an LCD with a 8x2 header
What you'll need
 | Assembled Arduino board, preferrably a Duemilanove, or Diecimila (or whatever the latest version is) but NG is OK too | Adafruit $30 |
 | USB Cable. Standard A-B cable is required. Any length is OK. | Adafruit Or any computer supply store $5| |  |2 pieces of 7-pin female header (you can always cut down longer header)|Any electronics supply store / $3|
| |2 pieces of 7-pin male header (you can always cut down longer header).|Any electronics supply store $0.50 |
 | Arduino Prototyping Shield kit, without breadboard! | Adafruit \\ $15 |
 | Character LCD with parallel interface | Pretty much any online electronics shop! |
 |
/home/ladyada/public_html/wiki/data/attic/tutorials/learn/lcd/lcdshield.html.1287687504.txt.gz · Last modified: 2016/01/28 18:05 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
