Differences

This shows you the differences between two versions of the page.

--- tutorialslibrary:arduino:arduinoisp.html [2012/03/18 16:30]
ladyada [Parts!]
+++ tutorialslibrary:arduino:arduinoisp.html [2012/12/09 16:53]
ladyada
@@ Line 26: / Line 26: @@
   *[[http://www.ladyada.net/wiki/partfinder/microcontroller?s[]=atmega328p|Blank ATmega328P]]
-If you bought the kit from Adafruit, you'll have an extra few items such as a Piezo beeper, LEDs, buttons, etc. that you can use for the Standalone version of this project, just ignore them for now!
+If you bought the kit from Adafruit, you'll have an extra few items such as a Piezo beeper, LEDs, buttons, etc. that you can use for the [[http://ladyada.net/library/tools/standaloneisp.html|Standalone version of this project]], just ignore them for now!
 ==== Assemble!  ====
@@ Line 41: / Line 41: @@
-  *Pin 1 to digital 10 - Blue
+  *Pin 1 to digital 10 - Blue **Don't forget to bend the wire over underneath to connect to the ZIF socket pin when soldering!!!**
   *Pin 7 to 5V - Red
   *Pin 8 to Ground - Black
@@ Line 63: / Line 63: @@
-Time to load the sketch! [[https://raw.github.com/adafruit/ArduinoISP/master/ArduinoISP2.pde|Grab the code from our Github repository and paste it into a new sketch.]] Then upload it to the Arduino
+Time to load the sketch! [[https://raw.github.com/adafruit/ArduinoISP/master/ArduinoISP.ino|Grab the code from our Github repository and paste it into a new sketch.]] Then upload it to the Arduino

AdaWiki