User Tools

Site Tools


wavebubble:wave_bubble_2010

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wavebubble:wave_bubble_2010 [2011/01/16 16:04]
mictronics Added main board pictures
wavebubble:wave_bubble_2010 [2016/01/28 18:05] (current)
Line 32: Line 32:
 \\ \\
 == Download Design Files == == Download Design Files ==
-Schematic:\\ +Schematic: {{:​wavebubble:​wb2010-usb_batt_schematic.pdf|}}\\
-{{:​wavebubble:​wb2010-usb_batt_schematic.pdf|}}\\+
 \\ \\
-PCB Layout:\\ +PCB Layout: {{:​wavebubble:​wave_bubble-usb_batt_ltc1730.zip|}}\\ 
-{{:​wavebubble:​wave_bubble-usb_batt_ltc1730.zip|}}\\+Gerber files (see .Info): ​
 \\ \\
 Target Viewer - Required to open the PCB layout files:\\ Target Viewer - Required to open the PCB layout files:\\
Line 44: Line 43:
 ^Name ^Value ^Package ^DIGIKEY ^  ^Name ^Value ^Package ^DIGIKEY ^
 |BAT1 |LiPo 3.7V/​1800mAh |BATTERY |  |BAT1 |LiPo 3.7V/​1800mAh |BATTERY | 
-|C1 |100n |1206 |399-1249-1-ND | +|C1 |.10 uF, 50V |1206 |399-1249-1-ND | 
-|C2 |100n |1206 |399-1249-1-ND | +|C2 |.10 uF, 50V |1206 |399-1249-1-ND | 
-|C3 |100n |1206 |399-1249-1-ND | +|C3 |.10 uF, 50V |1206 |399-1249-1-ND | 
-|C4 |100n |1206 |399-1249-1-ND | +|C4 |.10 uF, 50V |1206 |399-1249-1-ND | 
-|C5 |1u |1206 |490-1832-1-ND | +|C5 |1uF, 25V |1206 |490-1832-1-ND | 
-|C6 |220u/6.3V |SMD_R8X5,​4_ELKO |493-2156-1-ND | +|C6 |220uF, ​6.3V |SMD_R8X5,​4_ELKO |493-2156-1-ND | 
-|C7 |47u/6.3V |SMD_R5X5,​4_ELKO |493-2086-1-ND |+|C7 |47uF, 6.3V |SMD_R5X5,​4_ELKO |493-2086-1-ND |
 |C8 |1u |1206 |490-1832-1-ND | |C8 |1u |1206 |490-1832-1-ND |
 |C9 |47n |1206 |399-1246-1-ND | |C9 |47n |1206 |399-1246-1-ND |
Line 82: Line 81:
 Board size is 77mmx52mmx10mm\\ Board size is 77mmx52mmx10mm\\
 \\ \\
-Top layer (Prototype Rev. A):\\+Top layer (Prototype Rev. 2a):\\
 {{:​wavebubble:​wb2010_main_top.jpg?​640x480}} {{:​wavebubble:​wb2010_main_top.jpg?​640x480}}
 \\ \\
-Bottom layer (Prototype Rev. A):\\+Bottom layer (Prototype Rev. 2a):\\
 {{:​wavebubble:​wb2010_main_bottom.jpg?​640x480}} {{:​wavebubble:​wb2010_main_bottom.jpg?​640x480}}
 \\ \\
 == Download Design Files == == Download Design Files ==
-Schematic:\\+Schematic ​(Rev. 2b){{:​wavebubble:​wb2010-main_schematic.pdf|}}
 \\ \\
-PCB Layout:\\+PCB Layout ​(Rev. 2b){{:​wavebubble:​wave_bubble-main_new_power_switch_v2.zip|}}\\ 
 +Gerber files (see .Info): ​
 \\ \\
 Target Viewer - Required to open the PCB layout files:\\ Target Viewer - Required to open the PCB layout files:\\
Line 171: Line 171:
 \\ \\
 Digikey BOM ID: 22247 Digikey BOM ID: 22247
 +
 +
 +== Errata ==
 +
 +Rev. 2b
 +   * Nothing to report so far.
 +
 +== Hints & Testing ==
 +
 +Wavebubble2010 Firmware for hardware tests: {{:​wavebubble:​wb2010_hardware_test.zip|}}\\
 +The ZIP contains the sourcecode and a precompiled .hex file for the ATmega168V.\\
 +\\
 +Flash the .hex file using a AVR programmer of your choice. Set the ATmega168V fuses as shown below.\\
 +\\
 +Fuses settings for the AVR ATmega168V in AVR-Studio:​{{:​wavebubble:​avr_fusesettings.jpg}}\\
 +\\
 +To run the tests connect the Wavebubble2010 via USB and open a terminal programm. Set the terminal to 19200Baud 8N1.\\
 +Rest should be self explaining. Type characters to run tests from the menu.
/home/ladyada/public_html/wiki/data/attic/wavebubble/wave_bubble_2010.1295193864.txt.gz · Last modified: 2016/01/28 18:05 (external edit)