User Tools

Site Tools


x0x:frontpanelmods

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

x0x:frontpanelmods [2007/12/03 05:11]
127.0.0.1 external edit
x0x:frontpanelmods [2016/01/28 18:05]
Line 1: Line 1:
-{{http://​www.ladyada.net/​make/​x0xb0x/​gallery/​x0x-26.jpg }} 
  
-==== Making BijouBitterSolies Panel ==== 
-x0xb0x #026 (BijouBittersolie) did an amazing front panel mod and created an amazing 303-like front panel.[[http://​www.ladyada.net/​make/​x0xb0x/​gallery/​x0xb0x26_Panel.zip|Here is a link to his TIF file]].  ​ 
- 
-  - Print out the TIF file on card stock 
-  - Cut out the holes for LED's, Switches and Knobs 
-  - Trim the sides, ​ leaving 1 1/2 CM at the top and sides, and 2 CM at the bottom 
-  - Fold the exess at the bottom and sides over, and screw the top panel in 
-  - Revel in the beauty. 
- 
-=== Notes about the TIF file === 
-  * The Holes don't line up perfectly with the AutoCAD file 
-  * The font seems to be Helvetica 9.2 pt.  Arial 9.2 will work in a pinch. ​ The font spacing is roughly 25. 
-  * The yellow is: C 2%, M 11%, Y 32%, K 0%.  Or in RGB if you like: #FFE3A3. 
- 
-==== Computer Controlled Skin (by Jonnay) ==== 
- 
-Jonnay has updated and added to the panel done by BijouBittersolie,​ photos are coming soon.  Right now it is V0.9 and is available here: {{x0x:​jonnay_x0xb0x_mainpanel_0_9.ai}} 
- 
-Here is the todo list 
-  * Move the panel to a set place on the page (1 inch x 1 inch) 
-  * Print red on the backside instead of the front 
-  * more whitespace between volume and "​computer controlled"​ (knob in the way) 
-  * more whitespace for "​voltage controlled oscillator"​ (washer in the way)  
-  * cut out the paper completely, don't fold 
-  * expand lines on bank select 
-  * Fix right-hand spacing between "Mode Select"​ in the "​Sequencer"​ section 
-  * make sure #1 in PTN# is bold 
-  * increase point size in #1, #5, #9 and #13 in PTN# 
-  * give the user icon sunglasses so it looks more like a guy, rather then a keyhole 
- 
-==== Making your own Panel ==== 
- 
-You can download the AutoCAD DXF files for your panels from [[http://​www.ladyada.net/​make/​x0xb0x/​download.html|Here]]. ​ I have converted the Front and IO panels to bare Illustrator files that you can use to make a panel mod like BijouBitterSolie. 
- 
-=== Warning! === 
-Apparently the size is off by 1/8th of an inch each direction on the main panel, and might be the same for the I/O panel. ​ Before you use them, scale them by 1/8th an inch. 
-  * {{x0x:​x0xb0x_mainpanel.ai}} 
-  * {{x0x:​x0xb0x_iopanel.ai}} ​ 
- 
- 
-CategoryMods 
/home/ladyada/public_html/wiki/data/pages/x0x/frontpanelmods.txt · Last modified: 2016/01/28 18:05 (external edit)