Differences

This shows you the differences between two versions of the page.

--- x0x:vcofabrication [2007/12/03 05:12]
127.0.0.1 external edit
+++ x0x:vcofabrication [2016/01/28 18:05]
@@ Line 1: / Line 1: @@
-==== Pointers ====
-{{template>.templates:fabinfo|difficulty=6|t=0.122|h=0.180|p=0.278|components=61|resistors=34, 2 Thermistors|capacitors=3 Electrolytic, 4 Polyester|diodes=3|transistors=8|ics=3|other=1 Pot, 1 Switch, 2 Trim Pots}}
-Be careful, there are 4 different kinds of transistors on this circuit.  Make sure you get the right one in the right place.  After you build the VCO, it is a good idea to [[VcoTesting|Test]] the circuit after you build it, this will make tesitng (and troubleshooting, if you have to) the other sections much easier.
-==== Additions ====
-You might want to mount Q8 on a SipSocket, so that you can put a HighGainTransistor in there.
-If you are unsure of your soldering skills, you can also mount the 3 ICs on DipSockets. Also, if in the future one of these ICs were to fail, you will be glad you socketed them!
-==== Mistakes to avoid ====
-**equaliser says... ** The picture in the fab manual for the 2SK30AO transistor is actually of the AY transistor, which I soldered instead of the AO. Ignore the pic - you need the AO in the VCO.
-{{template>.templates:fabmenu}}

AdaWiki