x0x:voltagecontrolledamplifier
Differences
This shows you the differences between two versions of the page.
|
x0x:voltagecontrolledamplifier [2009/04/05 10:04] bcbox3 |
x0x:voltagecontrolledamplifier [2016/01/28 18:05] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ===== Voltage Controlled Amplifier ===== | ||
| - | {{template>.templates:schema|section=Voltage Controlled Amplifier|inputs=VoltageControlledFilter Audio\\ | ||
| - | EnvelopeGenerator Gate\\ | ||
| - | EnvelopeGenerator Envelope\\ | ||
| - | EnvelopeGenerator Accent|outputs=HeadphoneAndMixer Audio}} | ||
| - | WorkOnMe | ||
| - | |||
| - | ==== BA6110 Pinout ==== | ||
| - | The BA6110 comes in SIP and DIP (BA6110FS) packages. The x0xb0x ships with the SIP version, but the DIP pinout is provided for reference in case you need to replace it, and you can't find the SIP. | ||
| - | |||
| - | ^SIP ^ DIP Pin ^ Function ^ | ||
| - | | 1 | 1 | Positive Input | | ||
| - | | 2 | 3 | Negative Input | | ||
| - | | 3 | 5 | GND (input bias?) | | ||
| - | | 4 | 7 | Control Signal (envelope) | | ||
| - | | 5 | 9 | GND (Vcc) | | ||
| - | | 6 | 11 | unbuffered VCA out | | ||
| - | | 7 | 12 | buffer input | | ||
| - | | 8 | 14 | buffered output | | ||
| - | | 9 | 15 | PWR | | ||
| - | |||
| - | ==== notes from moogah ==== | ||
| - | the vca envelope generator is created by this same pulse | ||
| - | and by the gate signal created by q36 | ||
| - | |||
| - | the gate signal merely turns on the vca circuit\\ | ||
| - | the pulse signal generates the attack and decay via q32 and q31\\ | ||
| - | q31 creates the current that controls the amplitude of the vca\\ | ||
| - | q1 through q4 are merely current mirrors to reflect this current appropriately to the 6110 since it is different than the 662 | ||
| - | |||
| - | |||
| - | |||
| - | ==== note from bcbox ==== | ||
| - | [[http://www.ladyada.net/forums/viewtopic.php?t=5673|The]] output of the BA6110 is a few dB hotter than the BA662, I measured as much as 5dB. | ||
| - | If using the BA6110 changing R155 to 100k will give the same performance as a tb-303. | ||
| - | There will still be some distortion with higher settings of volume and accent - the tb-303 does it too. | ||
| - | Or if you want to maximum headroom and minimize noise just keep it as is and turn the volume control down until it doesn't clip (the 'mixer' stage is after the volume control). | ||
| - | |||
| - | {{template>.templates:fabmenu}} | ||
/home/ladyada/public_html/wiki/data/pages/x0x/voltagecontrolledamplifier.txt · Last modified: 2016/01/28 18:05 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
