skip to content

AdaWiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

You are here: start » laserinfo » pcb_stencils

Trace:

laserinfo:pcb_stencils

====== How to make PCB solder paste stencils ======

You'll need: 
  - A laser cutter
  - Kapton film, I like the 1 mil thick 1 ft square sheets from [[McMaster-Carr|http://www.mcmaster.com/#2271K2]]
  - Solder paste such as [[Kester No-Clean|http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=KE1507-ND]]

/home/ladyada/public_html/wiki/data/attic/laserinfo/pcb_stencils.1241639645.txt.gz · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

CC Attribution-Share Alike 4.0 International