User Tools

Site Tools


mdcpickandplace:feeders

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
mdcpickandplace:feeders [2009/10/25 05:58]
ladyada created
mdcpickandplace:feeders [2016/01/28 18:05] (current)
Line 1: Line 1:
 +===== Setting up feeders =====
 +
 +Setting up the feeders
 +
 http://​freaklabs.org/​index.php/​Blog/​Misc/​MDC-Pick-and-Place-Setup-Tutorial.html http://​freaklabs.org/​index.php/​Blog/​Misc/​MDC-Pick-and-Place-Setup-Tutorial.html
 +
 +===== Adjusting 8mm Feeders for thicker components =====
 +
 +If you try to feed thicker 8mm tape through the standard 8mm reel configuration,​ the parts may pop out of place when the tape advances because they catch on the bottom. ​ To accomodate thicker parts (like 1.5mm high 0805 10uF caps, etc.), you can remove the plastic guide underneath the tape as follows. ​ This allows more bottom clearance for the tape.
 +
 +{{:​mdcpickandplace:​tapeguidea.jpg|}}
 +{{:​mdcpickandplace:​tapeguideb.jpg|}}
/home/ladyada/public_html/wiki/data/attic/mdcpickandplace/feeders.1256450289.txt.gz · Last modified: 2016/01/28 18:05 (external edit)