Differences

This shows you the differences between two versions of the page.

--- tutorials:make:ledbelt:index.html [2012/01/09 18:03]
ladyada [Step 5. Upload test blinky sketch!]
+++ tutorials:make:ledbelt:index.html [2016/01/28 18:05] (current)
@@ Line 184: / Line 184: @@
 {{ :tutorials:make:ledbelt:leocom.gif? |}}
-To upload the LEDbeltKit sketch, simply have the board plugged in, and click the Upload button in the IDE
+To upload the LEDbeltKit sketch, simply have the board plugged in, click the Upload button in the IDE and press the **RESET** button on the breakout board
+<class notewarning>
+Don't forget to press the reset button on the blue 32u4 PCB right after clicking upload to launch the bootloader and get it ready for programming!
+</class>
 {{ :tutorials:make:ledbelt:leoupload.gif? |}}
-Once you've uploaded you should see the LED belt perform the blinky test!
+Once you've uploaded you should see the LED belt perform the blinky test! It will look a little similar to this:

AdaWiki