This shows you the differences between two versions of the page.
wavebubble:wave_bubble_2010 [2010/09/13 17:12] mictronics |
wavebubble:wave_bubble_2010 [2016/01/28 18:05] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Wave Bubble 2010 ====== | ||
- | Major contributions to the design of this version go to Mictronics and TheFallen. | ||
- | |||
- | This wiki has been created to collect all errata regarding new parts, schematics, etc. | ||
- | ==== Wave Bubble 2010 - Design by Mictronics ==== | ||
- | === USB and Battery Charger board === | ||
- | |||
- | Here is a short descrition of the USB and Battery Charger board for my Wave Bubble 2010.\\ | ||
- | |||
- | Due to hardly available parts on Digikey the battery charging circuit was modified and uses now an LTC1730-4.2 | ||
- | LiPo charger IC. | ||
- | The LTC1730-4.2 handles charging of a single LiPo cell and includes overcurrent and overtemperature protection | ||
- | for the battery. The board connects through a mini-USB connector either to a PC for data transfer or to a | ||
- | wall adapter for charging.\\ | ||
- | Charging current depends on the external power supply but overcurrent protection is set to 2A. | ||
- | A green LED will indicate charging status.\\ | ||
- | \\ | ||
- | USB data transfer is handled by a simple USB-RS232 converter, the FT232L.\\ | ||
- | \\ | ||
- | Board size is 77mmx52mmx7mm without battery.\\ | ||
- | Maximum battery size: 65mmx35mm\\ | ||
- | \\ | ||
- | Top layer:\\ | ||
- | {{:wavebubble:usb_batt_top.jpg?640x480}} | ||
- | \\ | ||
- | Bottom layer:\\ | ||
- | {{:wavebubble:usb_batt_bottom.jpg?640x480}} | ||
- | \\ | ||
- | == Download Design Files == | ||
- | Schematic:\\ | ||
- | {{:wavebubble:wb2010-usb_batt_schematic.pdf|}}\\ | ||
- | \\ | ||
- | PCB Layout:\\ | ||
- | {{:wavebubble:wave_bubble-usb_batt_ltc1730.zip|}}\\ | ||
- | \\ | ||
- | Target Viewer - Required to open the PCB layout files:\\ | ||
- | [[http://www.target-3001.de/target/v14/englisch/tarv14viewer_e.exe]]\\ | ||
- | \\ | ||
- | Bill of Material: | ||
- | ^Name ^Value ^Package ^DIGIKEY ^ | ||
- | |BAT1 |LiPo 3.7V/1800mAh |BATTERIE | | ||
- | |C1 |100n |1206 |399-1249-1-ND | | ||
- | |C2 |100n |1206 |399-1249-1-ND | | ||
- | |C3 |100n |1206 |399-1249-1-ND | | ||
- | |C4 |100n |1206 |399-1249-1-ND | | ||
- | |C5 |1u |1206 |490-1832-1-ND | | ||
- | |C6 |220u/6.3V |SMD_R8X5,4_ELKO |493-2156-1-ND | | ||
- | |C7 |47u/6.3V |SMD_R5X5,4_ELKO |493-2086-1-ND | | ||
- | |C8 |1u |1206 |490-1832-1-ND | | ||
- | |C9 |47n |1206 |399-1246-1-ND | | ||
- | |C10 |22n |1206 |311-1176-1-ND | | ||
- | |C11 |100n |1206 |399-1249-1-ND | | ||
- | |D1 |GREEN |1206-D |160-1206-1-ND | | ||
- | |IC1 |FT232RL |TSSOP28 |768-1007-1-ND | | ||
- | |IC2 |LTC1730-4.2 |SO8 |LTC1730ES8-4.2#PBF-ND | | ||
- | |JP1 |Mini USB |MINI-USB-SMD |H2959CT-ND | | ||
- | |R1 |0.05 |1206 |P50NPCT-ND | | ||
- | |R2 |1K |1206 |311-1.0KERCT-ND | | ||
- | |R3 |4.7 |1206 |541-4.7ECT-ND | | ||
- | |R4 |10K |1206 |311-10KERCT-ND | | ||
- | |R5 |10K NTC |1206 |541-1151-1-ND | | ||
- | |R6 |4.1K |1206 |541-4.12KFCT-ND | | ||
- | \\ | ||
- | Digikey BOM ID: 15995 | ||
- | |||
- | === Wave Bubble Main Board === | ||
- | |||
- | PCB still in out for manufacturing... | ||
- | |||
- | More edits to come. |