In your kit you should find...
Check to make sure your kit comes with the following parts.Sometimes we make mistakes so double check everything and email support@adafruit.com if you need replacements!
| Image | Name |
Description | Distributor | Qty |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PCB | Printed circuit board | Adafruit | 1
|
|||||||
 |
IC1 | MCP1700-3302E/TO 3.3V linear voltage regulator |
Digikey Mouser |
1 | |||||||
 |
C2, C3 | 0.1uF ceramic capacitor | Digikey Mouser |
2 |
|||||||
 |
C4, C5 | 100uF / 6V capacitor | Digikey Mouser |
2 |
|||||||
 |
12-position 2mm female header Sockets for XPort Direct(+) |
Digikey | 2 |
||||||||
|
R1 |
10K ohm 1/4W 5% resistor (brown black orange gold) For use with wiznet modules |
Digikey Mouser |
1 |
|||||||
 |
2x10 pin female headers For use with wiznet modules |
2 |
|||||||||
 |
RESET | 6mm tactile switch | Digikey Mouser |
1 |
|||||||
 |
ICSP | 6-pin ICSP header | Digikey Mouser |
1 |
|||||||
 |
36 pin male header (1x36) | Digikey Mouser |
1
|
