Parts list
| Image | Name |
Description | Distributor | Qty |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PCB | Printed circuit board | Adafruit | 1
|
|||||||
 |
IC1, IC2 | L293D |
2 |
||||||||
|
IC3 | 74HC595N Serial to parallel output latch |
1 |
||||||||
 |
IC1' and IC2' | 16 pin sockets (OPTIONAL!) These are included in kits as of July 2010 |
Generic | 2 |
|||||||
 |
LED1 | 3mm LED, any color Motor power indicator |
3mm LED | 1 |
|||||||
|
R1 | 1.5K resistor for LED1 Brown Green Red Gold |
1/4W 5% resistor | 1 |
|||||||
|
R2 | 10K pulldown resistor Brown, Black, Orange, Gold |
1/4W 5% resistor | 1 |
|||||||
 |
RN1 | 10-pin bussed 10K-100K resistor network | 100K resistor network | 1 |
|||||||
 |
C2, C4, C6 | 0.1uF ceramic capacitor | Generic | 3 |
|||||||
 |
C1, C3, C5 | 100uF / 6V capacitor (or bigger) | 100uF/6V cap | 3 |
|||||||
 |
C7, C8 | 47uF / 25V capacitor (or bigger) | 47uF/25V cap | 2 |
|||||||
 |
X1 |
5-position 5.08 terminal block (Or a 3-position and a 2-position) |
5.08mm terminals | 2 |
|||||||
 |
X2 |
2-position 5.08 terminal block | 5.08mm terminals | 1 |
|||||||
 |
RESET | 6mm tactile switch | 6mm tact switch | 1 |
|||||||
 |
PWR | Jumper/shunt | 0.1" jumper | 1 |
|||||||
 |
36 pin male header (1x36) | Generic | 1
|
