Differences

This shows you the differences between two versions of the page.

--- wavebubble:wave_bubble_2010 [2010/09/12 09:17]
mictronics
+++ wavebubble:wave_bubble_2010 [2011/01/16 16:28]
mictronics Added schematic and layout file
@@ Line 5: / Line 5: @@
 This wiki has been created to collect all errata regarding new parts, schematics, etc.
 ==== Wave Bubble 2010 - Design by Mictronics ====
+See this thread for ongoing discussion: [[http://forums.adafruit.com/viewtopic.php?f=16&t=14782]]\\
 === USB and Battery Charger board ===
-Here is a short descrition of the USB and Battery Charger board for my Wave Bubble 2010.\\
+Here is a short description of the USB and Battery Charger board for my Wave Bubble 2010.\\
 Due to hardly available parts on Digikey the battery charging circuit was modified and uses now an LTC1730-4.2
@@ Line 29: / Line 32: @@
 \\
 == Download Design Files ==
-Schematic:\\
+Schematic: {{:wavebubble:wb2010-usb_batt_schematic.pdf|}}\\
-{{:wavebubble:wb2010-usb_batt_schematic.pdf|}}\\
 \\
-PCB Layout:\\
+PCB Layout: {{:wavebubble:wave_bubble-usb_batt_ltc1730.zip|}}\\
-{{:wavebubble:wave_bubble-usb_batt_ltc1730.zip|}}\\
 \\
 Target Viewer - Required to open the PCB layout files:\\
-[[http://www.target-3001.de/target/v14/deutsch/tarv14viewer_d.exe]]\\
+[[http://www.target-3001.de/target/v14/english/tarv14viewer_e.exe]]\\
 \\
 Bill of Material:
 ^Name	^Value			^Package		^DIGIKEY ^
-|BAT1	|LiPo 3.7V/1800mAh	|BATTERIE		 |
+|BAT1	|LiPo 3.7V/1800mAh	|BATTERY		 |
 |C1	|100n			|1206		|399-1249-1-ND	|
 |C2	|100n			|1206		|399-1249-1-ND	|
@@ Line 46: / Line 47: @@
 |C4	|100n			|1206		|399-1249-1-ND	|
 |C5	|1u			|1206		|490-1832-1-ND	|
-|C6	|220u/6.3V		|SMD_R8X6,3_ELKO	|493-2156-2-ND	|
+|C6	|220u/6.3V		|SMD_R8X5,4_ELKO	|493-2156-1-ND	|
-|C7	|47u/6.3V		|SMD_R5X6_ELKO	|493-2086-1-ND	|
+|C7	|47u/6.3V		|SMD_R5X5,4_ELKO	|493-2086-1-ND	|
 |C8	|1u			|1206		|490-1832-1-ND	|
 |C9	|47n			|1206		|399-1246-1-ND	|
@@ Line 54: / Line 55: @@
 |D1	|GREEN			|1206-D		|160-1206-1-ND	|
 |IC1	|FT232RL		|TSSOP28		|768-1007-1-ND	|
-|IC2	|LTC1730-4.2		|8-SMD-1		|LTC1730ES8-4.2#PBF-ND	|
+|IC2	|LTC1730-4.2		|SO8		|LTC1730ES8-4.2#PBF-ND	|
 |JP1	|Mini USB		|MINI-USB-SMD	|H2959CT-ND	|
 |R1	|0.05			|1206		|P50NPCT-ND	|
 |R2	|1K			|1206		|311-1.0KERCT-ND |
-|R3	|4.7			|1206		|311-4.7ERTR-ND	|
+|R3	|4.7			|1206		|541-4.7ECT-ND	|
 |R4	|10K			|1206		|311-10KERCT-ND	|
 |R5	|10K NTC		|1206		|541-1151-1-ND	|
 |R6	|4.1K			|1206		|541-4.12KFCT-ND |
+\\
+Digikey BOM ID: 15995
-==== Miscellaneous ====
+== Errata ==
-Quote from http://forums.adafruit.com/viewtopic.php?f=16&t=14782#p72524
+Nothing to report so far.
-"I changed a couple of things so far:
+== Hints & Testing ==
-- using a ROS-1300 and ROS-2700-1819 to cover the whole range from 400MHz up to 2700MHz
+  * Populating the board should be a big deal, double check the FT232RL for bad soldering.\\
-- the voltage for the VCO is selectable by jumper, either 5V or 12V to keep compatibility to the original VCOs ROS-1200 & ROS-2500
+  * To test the serial connection just short the RX and TX line on the main board connector and send something through your terminal, the characters will be echoed back.\\
-- using a GALI-84 or SGA-6589Z
+  * To check the LiPo charger connect a current meter between one battery terminal and the board. Depending on the charging level you should see a continuous current, or in trickle charge mode an intermittent current. Heat the temperature sensor in the middle of the board with a soldering iron, charging should stop immediately and continue after short cool down.
-- input voltage for the TPS79333 is selectable by jumper, either Vbatt or 5V
-- using the low batt voltage detection
-- there will be no internal board antennas since I have real doubts that they are that efficient"
-More edits to come.
+=== Wave Bubble Main Board ===
+Board size is 77mmx52mmx10mm\\
+\\
+Top layer (Prototype Rev. 2a):\\
+{{:wavebubble:wb2010_main_top.jpg?640x480}}
+\\
+Bottom layer (Prototype Rev. 2a):\\
+{{:wavebubble:wb2010_main_bottom.jpg?640x480}}
+\\
+== Download Design Files ==
+Schematic (Rev. 2b): {{:wavebubble:wb2010-main_schematic.pdf|}}
+\\
+PCB Layout (Rev. 2b): {{:wavebubble:wave_bubble-main_new_power_switch_v2.zip|}}
+\\
+Target Viewer - Required to open the PCB layout files:\\
+[[http://www.target-3001.de/target/v14/english/tarv14viewer_e.exe]]\\
+\\
+Bill of Material:
+^Count	^Name	^Value			^Package		^DIGIKEY ^
+|1	|C1	|100u/6.3V	|SMD_R6X6_ELKO	|493-2088-1-ND	|
+|19	|C2,C3,C6,C7,C9,C16,C17,C19,C21,C22,C25,C26,C27,C28,C31,C32,C33,C61,C62	|100n	|1206	|399-1249-1-ND	|
+|10	|C4,C5,C8,C14,C15,C34,C35,C42,C45,C64	|1u	|1206	|490-1832-1-ND	|
+|1	|C10	|10n	|1206	|399-1234-1-ND	|
+|1	|C11	|100u/4V	|SMD_R5X6_ELKO	|493-2079-1-ND	|
+|1	|C12	|470p	|1206	|399-1213-1-ND	|
+|1	|C13	|100u/10V	|6032	|495-1528-1-ND	|
+|1	|C18	|22u/35V	|7243	|495-1583-1-ND	|
+|1	|C20	|68u/16V	|6032	|478-1774-1-ND	|
+|4	|C23,C24,C29,C30	|4.7u	|1206	|399-1262-1-ND	|
+|3	|C36,C40,C47	|68p	|0603	|399-1058-1-ND	|
+|8	|C38,C46,C48,C49,C50,C51,C52,C55	|100p	|0603	|399-1061-1-ND	|
+|2	|C41,C44	|1000p	|0603	|399-1082-1-ND	|
+|3	|C43,C53,C54	|22p	|0603	|399-1053-1-ND	|
+|4	|C56,C57,C58,C63	|10n	|0603	|478-1254-1-ND	|
+|1	|C59	|100n	|0603	|490-1524-1-ND	|
+|1	|C60	|1u	|0603	|445-1322-1-ND	|
+|3	|D1,D2,D3	|SS14	|SMA	|SS14CT-ND	|
+|1	|D4	|GREEN	|1206-D	|160-1206-1-ND	|
+|2	|D5,D6	|SMAZ22-13-F	|SMA	|SMAZ22-FDICT-ND	|
+|1	|IC1	|TPS79333	|SOT-23-5	|296-12961-1-ND	|
+|1	|IC2	|LM2731Y	|SOT-23-5	|LM2731YMFCT-ND	|
+|1	|IC3	|LT1173CS8	|SOIC-8	|LT1173CS8#PBF-ND	|
+|1	|IC4	|LT1301CS8	|SOIC-8	|LT1301CS8#PBF-ND	|
+|1	|IC5	|ATMEGA168-10V	|TQFP32	|ATMEGA168-20AU-ND	|
+|1	|IC6	|AD8402ARZ10	|SOIC-14	|AD8402ARZ10-ND	|
+|1	|IC7	|NE555D	|8-SMD-1	|296-6501-1-ND	|
+|2	|IC8,IC9	|LM358D	|SOIC-8	|497-1591-1-ND	|
+|2	|IC10,IC11	|MIC2514	|SOT-23-5	|576-1085-1-ND	|
+|1	|IC12	|MIC2506YM	|SOIC-8	|576-1084-ND	|
+|1	|IC13	|LMX2433	|TSSOP20	|	|
+|1	|IC14	|LP2985AIM5-2.5CT	|SOT23/5	|LP2985AIM5-2.5/NOPBCT-ND	|
+|1	|JP1	|USB/Batt Board	|1X04	|SAM1029-50-ND	|
+|1	|JP2	|ISP	|2X03-90	|SAM1049-50-ND	|
+|2	|JP5,JP6	|SMA J629-ND	|SMA J629-ND	|J629-ND	|
+|1	|L1	|7.3uH	|CDRH6D28 SERIES	|308-1500-1-ND	|
+|2	|L2,L3	|33uH	|CDRH6D28 SERIES	|308-1494-1-ND	|
+|2	|L4,L5	|FERRIT	|1206	|240-2413-1-ND	|
+|1	|L6	|22nH	|0603	|553-1021-1-ND	|
+|1	|L7	|33nH	|0603	|553-1023-1-ND	|
+|1	|R1	|510K	|1206	|P510KFCT-ND	|
+|1	|R2	|330K	|1206	|P330KFCT-ND	|
+|1	|R3	|47K	|1206	|311-47KERCT-ND	|
+|1	|R4	|13K	|1206	|311-13.0KFRCT-ND	|
+|1	|R5	|820K	|1206	|311-820KERCT-ND	|
+|1	|R6	|50K	|1206	|311-49.9KCRCT-ND	|
+|8	|R7,R13,R16,R17,R18,R19,R38,R39	|10K	|1206	|311-10KERCT-ND	|
+|2	|R8,R9	|1K	|1206	|311-1.0KERCT-ND	|
+|1	|R12	|750	|1206	|P750ECT-ND	|
+|1	|R14	|20K	|1206	|311-20KERCT-ND	|
+|1	|R15	|68	|1206	|311-68ERCT-ND	|
+|2	|R20,R21	|30K(47K)	|1206	|P30.0KFCT-ND	|
+|4	|R23,R24,R25,R27	|0	|0603	|311-0.0GRCT-ND	|
+|2	|R28,R29	|1	|1206	|311-1.0ERCT-ND	|
+|2	|R30,R31	|50	|0603	|RHM49.9HCT-ND	|
+|4	|R32,R33,R34,R35	|18	|0603	|RHM18GCT-ND	|
+|2	|R36,R37	|10K	|0603	|RHM10KGCT-ND	|
+|2	|R40,R42	|10	|0603	|RHM10GCT-ND	|
+|1	|R41	|120	|0603	|RHM120GCT-ND	|
+|2	|R43,R45	|22	|0603	|RHM22GCT-ND	|
+|1	|R44	|47	|0603	|RHM47GCT-ND	|
+|1	|R46	|100	|1206	|311-100ERCT-ND	|
+|2	|R47,R48	|100K	|1206	|311-100KERCT-ND	|
+|2	|S1,S2	|Cycle Program, Power ON	|SWITCH TL3330 SERIES	|EG4388CT-ND	|
+|1	|T1	|MMBT3906	|SOT23/3	|568-1742-1-ND	|
+|2	|T2,T3	|GALI-84	|SOT-89	|www.mini-circuits.com	|
+|1	|T4	|FDN302P	|SSOT	|FDN302PCT-ND	|
+|1	|T5	|FDV303N	|SSOT	|FDV303NCT-ND	|
+|1	|VCO1	|ROS-2700-1819	|VCO CK605 ROS SERIES	|www.mini-circuits.com	|
+|1	|VCO2	|ROS-1300	|VCO CK605 ROS SERIES	|www.mini-circuits.com	|
+|1	|X1	|10MHz	|ABMM Crystal	|535-9150-1-ND	|
+\\
+Digikey BOM ID: 22247

AdaWiki

User Tools

Site Tools

Differences

Page Tools