User Tools

Site Tools


tutorials:products:usbdcsolarlipo:solarprep.html

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tutorials:products:usbdcsolarlipo:solarprep.html [2011/07/01 20:32]
daigo created
tutorials:products:usbdcsolarlipo:solarprep.html [2016/01/28 18:05] (current)
Line 5: Line 5:
 The first thing to do before starting to charge with a solar panel is to install the large filtering capacitor. This capacitor is necessary to stabilize the panel a little, and since we're going to charge with a lot of current, the capacitor needs to be pretty big. There is a spot on the PCB for the capacitor, you can of course install it directly there by soldering the wires of the capacitor into the pads. The first thing to do before starting to charge with a solar panel is to install the large filtering capacitor. This capacitor is necessary to stabilize the panel a little, and since we're going to charge with a lot of current, the capacitor needs to be pretty big. There is a spot on the PCB for the capacitor, you can of course install it directly there by soldering the wires of the capacitor into the pads.
  
 +<class warning>
 **Make sure to check the polarity of the capacitor, make sure the positive lead of the capacitor goes into the pad marked +!** **Make sure to check the polarity of the capacitor, make sure the positive lead of the capacitor goes into the pad marked +!**
 +</​class>​
  
 [[http://​www.ladyada.net/​images/​usbdcsolarlipo/​bigcap.jpg|{{ ​ http://​www.ladyada.net/​images/​usbdcsolarlipo/​bigcap_t.jpg?​nolink&​500x390 ​ |}}]] [[http://​www.ladyada.net/​images/​usbdcsolarlipo/​bigcap.jpg|{{ ​ http://​www.ladyada.net/​images/​usbdcsolarlipo/​bigcap_t.jpg?​nolink&​500x390 ​ |}}]]
/home/ladyada/public_html/wiki/data/attic/tutorials/products/usbdcsolarlipo/solarprep.html.1309552331.txt.gz · Last modified: 2016/01/28 18:05 (external edit)